everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 1 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng technical data sheet 0603 package chip led (0.6mm height) 19 - 213/b 7 c - aq2s1b2 /3t features ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? mono - color type. ? pb - free . ? the product itself will remain within rohs complaint version descriptions ? the 19 - 21 3 smd led is much smaller than lead frame type components, thus enable small er board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? b acklighting in dashboard and switch. ? telecommunication: in dicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide part no. chip emitted color resin color material 19 - 213/b 7 c - aq2s1b2 /3t in gan blue water clear
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 2 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng package outline dimension s note: the tolerances unless mentioned are 0.1mm, u nit = mm .
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 3 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng absolute maximum ratings (ta=25 parameter symbol rating unit reverse voltage v r 5 v forward current i f 30 ma peak forward current (duty 1/10 @1khz) i f p 100 ma power dissipat ion pd 110 mw electrostatic discharge (hbm) esd 1000 v operating temperature topr - 40 ~ +85 storage temperature tstg - 40 ~ +90 soldering temperature tsol reflow soldering:260 for 10 sec hand soldering:350 for 3 sec electro - optical characteristi cs (ta=25 parameter symbol min. typ. max. unit condition luminous intensity iv 90.0 ----- 225 mcd i f = 20 ma viewing angle 2 1/2 ----- 120 ----- deg peak wavelength p ----- 468 ----- nm dominant wavelength d 464.5 ----- 476.5 nm spectrum radiatio n bandwidth ----- 25 ----- nm forward voltage v f 2.90 ----- 3.6 0 v reverse current i r ----- ----- 50 a v r = 5v notes: 1.tolerance of luminous intensity 2 .tolerance of dominant wavelength 3.tolerance of forward voltage
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 4 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng bin rang e of dom. wavelength group bin min max unit condition a a9 464.5 467.5 nm i f = 20 ma a10 467.5 470.5 a11 470.5 473.5 a12 473.5 476.5 bin rang e of luminous intensity bin min max unit condition q2 90.0 112 mcd i f = 20 ma r1 112 140 r2 140 180 s1 180 225 bin rang e of forward voltage group bin min max unit condition b2 36 2.90 3.00 v i f = 20 ma 37 3.00 3.10 38 3.10 3.20 39 3.20 3.30 40 3.30 3.40 41 3.40 3.50 42 3.50 3.60 notes: 1.tole rance of luminous intensity 2 .tolerance of dominant wavelength 3.tolerance of forward voltage
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 5 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng typical electro - optical characteristics curves relative luminous intensity -60 forward current derating curve 0 forward current 10 0 20 30 40 50 1 10 40 20 60 100 85 0.7 0.9 0.8 1.0 -20 -40 0 20 60 40 100 80 100 1000 luminous intensity vs. ambient temperature 0.4 0.3 0.5 0.1 0.2 70 0.6 80 90 50 60 40 radiation diagram 0 10 20 30 forward current luminous intensity vs forward current % relative luminous intensity 0 25 75 50 ( 100 ) forward current 0 10 20 i (ma) f 40 30 50 forward voltage forward current vs. ta=25c spectrum distribution ta=25c wavelength (nm) forward voltage (v )-volts f ta=25c ta=25c ambient temperature ta (c) ambient temperature ta (c)
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 6 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng label explanation cat: luminous intensity rank hu e: dom. wavelength rank ref: forward voltage rank reel dimensions n ote: the tolerances unless mentioned are 0.1mm, u nit = mm . rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight made in taiwan
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 7 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng carrier tape dimensions: loaded quantity 3 000 pcs per reel note : the tolerances unless mentioned are 0.1mm, u nit = mm moisture resistant packaging label aluminum moisture-proof bag desiccant label
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 8 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence l evel 90% ltpd 1 0% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 2 6 0 22 p cs. 0/1 2 temperature cycle h : + 100 22 pcs. 0/1 3 thermal shock h : +100 22 p cs. 0/1 4 high temperature storage temp. : 100 22 p cs. 0/1 5 low temperature storage temp. : - 40 22 p cs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 p cs. 0/1 7 high temperature / high hum idity 85 22 p cs. 0/1
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 9 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng precautions for use 1. over - current - proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package : t he led's floor life is 1 year under 30 or less and 6 0% rh or less. if unuse d leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking trea tment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do n ot warp the circuit board.
19 - 213/b 7 c - aq2s1b2 /3t everlight electroni cs co., ltd. http://www.everlight.com rev. 1 page: 10 of 10 device no: prepared date: 1 - jul - 20 11 prepared by: chen zheng 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do sol dering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double - head soldering i ron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight e lectronics co., ltd. tel: 886 - 2 - 2267 - 2000, 2267 - 9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886 - 2267 - 6244, 2267 - 6189, 2267 - 6306 tucheng, taipei 236, taiwan, r.o.c http://www.everlight.com
|
